How to remove GPS tracker from car?

If required, the external antenna should also be removed. This step may not be necessary in all cases, but if the antenna is attached to the tracker, it must be carefully disconnected and removed to avoid damaging it or the tracker itself.

To begin the process, it is essential to locate and access the vehicle tracker. This is the starting point of the entire procedure and ensures that you have physical access to the device that needs to be handled.

Once the vehicle tracker is accessed, the next step is to unplug all connections to the device. This includes any wires or cables that are attached to the tracker, which need to be disconnected carefully to avoid any damage to the device or the vehicle's electrical system.

After unplugging all connections, the power harness must be secured. This involves ensuring that the harness is properly fastened and will not come loose during the removal of other components. This step is crucial for safety reasons, as a loose power harness can pose a risk of electrical shorts or other hazards.

The next step in the procedure is to remove the Y-cable or ECMD cable, if present. These cables are often used for communication between the tracker and other vehicle systems, and their removal is necessary to fully disconnect the tracker from the vehicle.